Sintering machine tail dust filter bag

Data Box
Application： Sintering machine tail
Smoke composition：About 50% iron, about 10% CaO, with recycling value;
Moisture：Lower
Inlet dust concentration: 5～15g/Nm3；
Dust fineness: ≥50μm accounted for 42%; 50～10μm accounted for 39%;≤10μm accounts for 19%.
Dust specific resistance: 106～1012 Ω•cm.
Emission requirements：10mg/Nm3 (the filtration wind speed of the dust collector Varies from 0.78 to 0.90 m/min)
Filter material selection:
Generally glass fiber composite bag, pure aramid bag, PPS+PTFE composite bag. The plan is decided according to the actual temperature on site and the situation of desulfurization and denitrification. Dust collectors with better temperature control can use film-coated polyester bags.

• Category: Case
• Date: 2022-06-21
• Website:: /